Advertisement
Troubleshooting
Problem
The Cyclone is charged and connected to a flash
with a cable, but no indicator lights illuminate when
you turn it on.
The Cyclone is connected to the charger, and the
Charge indicator light is flashing instead of showing
a solid red light.
The Status indicator light is flashing.
The Cyclone is charged and connected to a flash
with a cable, but the flash does not fire.
Customer Service
For customer service, please go to www.boltflashes.com.
Solution
The cable is damaged or you are using the wrong
cable.
It will flash if the battery is not charged fully after
4 hours' continuous charging, which indicates
an overused or faulty battery. In this case, please
replace the battery immediately.
The pack is overheated. Turn it off and wait for at
least 10 minutes before using it again.
Make sure you have AA or other internal batteries
installed in the flash. These may be required for its
computer functions to work.
|
Troubleshooting
15
Advertisement
