Related Manuals for Bolt Cyclone
Summary of Contents for Bolt Cyclone
- Page 1 Inspiration strikes. iration strike . Inspiration strikes. iration strikes. iration strikes. CYCLONE BATTERY PACK User’s Manual...
- Page 2 Copyright © 2011 Gradus Group. Bolt and other names of Bolt products are trademarks of Gradus Group. Other product and corporate names mentioned herein are trademarks of their respective holders.
- Page 3 Thank you for choosing the Bolt Cyclone PP-300 power pack. This professional nickel-metal hydride (Ni-MH) battery pack powers a wide range of flash units. The Cyclone gives you the speed, portability, and reliable performance you need to make the most of your time and never miss important moments.
- Page 4 Overview Power button Multifunction socket Multifunction socket cover Status, Charge, and battery indicator lights Vent Padded feet Belt clip Shoulder strap lugs Status LED Charge LED Battery LED 1 (25%) Battery LED 2 (50%) Battery LED 3 (75%) Battery LED 4 (full) Shoulder strap AC battery charger BO-1003 Overview...
- Page 5 FULL STATUS CHARGE Overview...
- Page 6 Refer to your flash unit’s manual for information on its continuous full-power flash capacity and limitations. • Remove any cables from the multifunction socket when the Cyclone is not in use or charging, and cover the socket firmly with the multifunction socket cover.
- Page 7 Charging Your Cyclone The Cyclone offers a fast charging time of 2 hours and a charge-level indicator that’s easy to read at a glance. To charge your Cyclone with the included charger: Plug the charger unit into an AC outlet.
- Page 8 Checking the Cyclone’s charge level: When the Cyclone is not charging and is not connected to a flash unit, you can check the level of charge by pressing the power button. The battery LEDs will illuminate to indicate the level of charge as follows:...
- Page 9 Most compatible flash units require the standard batteries to be installed in order to power the computer functions that allow the flash to work. You may need to set your flash unit to recycle by drawing power only from the Cyclone to avoid draining the Connecting Your Cyclone...
- Page 10 Check your flash unit’s manual for details on the relevant setting. To connect your Cyclone to your flash unit: 1. Plug the 5-pin metal connector of the connection cable firmly into the multifunction socket of the Cyclone. Connecting Your Cyclone...
- Page 11 1. Press the power button until the Status and battery LEDs turn off. 2. Unplug the connection cable from the battery pack. Note: If you do not fire your flash for 60 minutes with the Cyclone connected, the battery pack will shut off automatically.
- Page 12 Using Your Flash with Your Cyclone Your Cyclone can recycle in just 1 second with many popular flash units, to keep you shooting and ensure that you don’t miss important moments. With your flash firing at full power, it can power between 250 and 400 flashes, depending on the specific unit you’re using.
- Page 13 Reading the indicator lights while using the Cyclone: When you’re using your Cyclone, its amber Status LED will remain on to indicate that the flash is ready to fire. Its four green battery LEDs will indicate the level of charge as follows:...
- Page 14 • Padded feet. Two rubberized feet give the Cyclone stability and protection when you set it down. • Belt clip. One of the easiest ways to carry the Cyclone is to attach it to your belt with the included clip.
-
Page 15: Troubleshooting
Troubleshooting Problem Solution The Cyclone is charged and connected to a flash The cable is damaged or you are using the wrong with a cable, but no indicator lights illuminate when cable. you turn it on. The Cyclone is connected to the charger, and the... -
Page 16: Specifications
AC battery charger BO-1003: Battery type: nickel-metal hydride (Ni-MH) Compatible battery pack: Cyclone PP-300 Voltage: 9.6 V DC Recharging time: 2 hours for Cyclone PP-300 Capacity: 2000 mAh Rated input: 100-240 V AC Recycle time with hotshoe-mounted flash units: Rated output: 12 V DC approx. -
Page 17: Limited Warranty
We shall not be responsible for any incidental or consequential damages or loss of profits arising out of the sale and use of Bolt products regardless of whether we knew or should have known of the possibility of such damages. To obtain warranty coverage during the Warranty Period, contact your place of purchase (“Seller”) to obtain a return merchandise authorization (“RMA”) number, and return to Seller the... - Page 18 Compatible Devices and Accessories The Cyclone is compatible with a wide range of hotshoe and handle-mount flash units. Make sure you select a connection cable that is compatible with your flash unit. Many compatible accessories are also available from Bolt and other brands. Bolt connection cables are interchangeable with some other manufacturers’...
- Page 19 BO-1002 CKE Nikon flash cable BO-1004 DC car charger Compatible Devices...
- Page 20 www.boltflashes.com Copyright © 2011 Gradus Group.