Advertisement
To disconnect your Cyclone from your flash unit:
1. Press the power button until the Status and battery LEDs turn off.
2. Unplug the connection cable from the battery pack.
Note: If you do not fire your flash for 60 minutes with the Cyclone connected, the battery pack will shut off
automatically.
2. Plug the other end of the connection cable
2
securely into the compatible power port on your
flash unit.
3. Press the power button on the Cyclone and wait
for the Status and battery LEDs to turn on.
When the Cyclone is charged, connected to your
flash unit, and turned on, the Status LED will glow
amber and the battery LEDs will glow green to
indicate the charge level of the battery.
Connecting Your Cyclone
|
11
Advertisement
