Page 3
Introduction Thank you for choosing Bolt, and congratulations on the purchase of your Bolt PP-400BP Battery Pack for PP-400DR Portable Power Pack. This rechargeable large-capacity lithium-ion battery pack supplies power to the Bolt PP-400DR power pack for on-camera flashes. When mounted on the PP-400DR, it will supply up to 1400 flashes (depending on flash unit and power setting) and fast recycling times for one or two portable flashes at the same time.
Page 4
10 minutes after 40 product yourself. Doing so will void the warranty, continuous full-power flashes. and Bolt will not be responsible for any damage. • Make sure the unit is powered off when plugging it There are high-voltage components inside. Contact in to a power source.
Page 5
Charging the PP-400BP To charge your PP-400BP: The PP-400BP can be charged as a free-standing unit or while mounted on the PP-400DR power pack. Plug the charger unit into an AC outlet. Plug the charger cable into the charging port on the PP-400BP.
Customer Service For customer service, please go to www.boltflashes.com. Specifications Power Pack PP-400BP: AC Charger BO-1008: Battery type: lithium-ion Input: 100-240V AC 50/60Hz Voltage: 11.1 V DC Output: 12V DC 1500mA Capacity: 4500 mAh Cord length: 60 in. (1.5 m) Battery charging time: approximately 2.5 hours Dimensions:...
LIMITED ONE-YEAR WARRANTY Bolt provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date or thirty (30) days after replacement (the “Warranty Period”), whichever occurs later.
Need help?
Do you have a question about the Cyclone DR PP-400BP and is the answer not in the manual?
Questions and answers