Related Manuals for Bolt Cyclone DR PP-400DR
Summary of Contents for Bolt Cyclone DR PP-400DR
- Page 1 Inspiration strikes Inspiration strikes CYCLONE | DR Bolt PP-400DR Dual Outlet Power Pack with Removable Battery User’s Manual...
- Page 2 Copyright © 2013 Gradus Group. Bolt and other names of Bolt products are trademarks of Gradus Group. Other product and corporate names mentioned herein are trademarks of their respective holders. All photos are for illustrative purposes only.
- Page 3 Introduction Thank you for choosing Bolt, and congratulations on the purchase of your Bolt PP-400DR Power Pack for Portable Flash. This rechargeable large-capacity lithium-ion battery pack will supply up to 1400 flashes (depending on flash unit and power setting) and fast recycling times for one or two portable flashes at the same time.
- Page 4 Overview Socket cover Cable locking mechanism Socket #1 Socket #2 Belt clip Charging port Battery pack Battery pack lock Control unit Shoulder strap Strap quick release LED battery level indicator Status indicator for Socket #1 Power button Status indicator for Socket #2 AC battery charger Overview...
- Page 5 Overview...
- Page 6 Warnings ⚠ ⚡ • Do not disassemble or attempt to service this product yourself. Doing so will void the warranty, and Bolt will not be responsible for any damage. There are high-voltage components inside. Contact can produce a dangerous electric shock.
- Page 7 • Use only parts provided by the manufacturer. • Please read and follow these instructions and keep this manual in a safe place. • Make sure the item is intact and that there are no missing parts. Charging the Cyclone DR To charge your Cyclone DR with the included charger: Plug the charger unit into an AC outlet.
- Page 8 To get the maximum capacity from your Cyclone DR: Charge your Cyclone DR shortly before use to ensure that the pack retains the maximum charge. Charge your Cyclone DR at a moderate room temperature, and avoid storing it in hot or cold environments between charging and use.
- Page 9 Checking the Cyclone DR’s charge level: When the Cyclone DR is not charging and is not connected to a flash unit, its level of charge can be checked by pressing the power button. The battery LEDs will illuminate to indicate the level of charge, as follows: Battery LED 1 on: 25% or lower charge level Battery LEDs 1-2 on: 25%-50% charge level Battery LEDs 1-3 on: 50%-75% charge level...
- Page 10 Cables sold by some flash and battery pack manufacturers are interchangeable with Bolt cables, but other flash brands use a different connector type. Make sure you select the right one.
- Page 11 To connect your Cyclone DR to your flash unit: Plug the metal connector of the connection cable firmly into one of the output sockets of the Cyclone DR. If using a cable with a locking mechanism, rotate the locking collar on the terminal to secure the cable.
- Page 12 Using Your Flash with Your Cyclone DR Your Cyclone DR can recycle in just 1 second with many popular flash units to keep you shooting and ensure that you don’t miss important moments. With your flash firing at full power, it can power between 1200 and 1400 flashes, depending on the specific unit you’re using.
- Page 13 Reading the indicator lights while using the Cyclone DR: When you’re using your Cyclone DR, its Red Status LED will remain on to indicate that the flash is ready to fire. Its four blue battery LEDs will indicate the level of charge as follows: Battery LED 1 on: 25% or lower charge level Battery LEDs 1-2 on: 25%-50% charge level Battery LEDs 1-3 on: 50%-75% charge level...
- Page 14 • Padded feet. Two rubberized feet give the Cyclone DR stability and protection when you set it down. • Belt clip. One of the easiest ways to carry the Cyclone DR is to attach it to your belt with the included clip.
-
Page 15: Troubleshooting
Troubleshooting Problem Solution The Cyclone DR is charged and connected to a flash The cable is damaged or you are using the wrong with a cable, but no indicator lights illuminate when cable. you turn it on. The Status indicator light is flashing. The pack is overheated. -
Page 16: Specifications
Specifications Power Pack Cyclone DR: AC Charger BO-1008: Battery type: lithium-ion Input: 100-240V AC 50/60Hz Voltage: 11.1 V DC Output: 12V DC 1500mA Capacity: 4500 mAh Cord length: 60 in. (1.5 m) Recycle time with hotshoe-mounted flash units: Dimensions: 3.75 x 1.25 x 1.62 in. approx. -
Page 17: Warranty
LIMITED ONE-YEAR WARRANTY Bolt provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date or thirty (30) days after replacement (the “Warranty Period”), whichever occurs later. - Page 18 The Cyclone DR is compatible with a wide range of hotshoe and handle-mount flash units. Make sure you select a connection cable that is compatible with your flash unit. Many compatible accessories are also available from Bolt and other brands. Bolt connection cables are interchangeable with some other manufacturers’ battery pack connection cables.
- Page 19 BO-1007 CKE Nikon Flash Cable BO-1006 CZ Canon Flash Cable With Locking Mechanism With Locking Mechanism BO-1005 Sony Flash Cable Bolt USB-C Charger for Mobile Devices Compatible Devices...
- Page 20 www.boltflashes.com Copyright © 2013 Gradus Group...
Need help?
Do you have a question about the Cyclone DR PP-400DR and is the answer not in the manual?
Questions and answers