Remove/Install The Sliding Side Window - Diamond DA20-C1 Maintenance Manual

DA20-C1 AMM
6.

Remove/Install the Sliding Side Window

A. Remove the Sliding Side Window
1. Remove the air scoop lock as follows:
- Remove the screw and the nut
- Remove the two thin washers and a nylon
washer
- Remove the air scoop lock.
2. Remove the clear and tinted sliding window air
scoop as follows:
- Remove the screw, the washer, and the
nut from the sliding window air scoop
hinge
- Remove the hinge
- Remove the clear/tinted sliding window air
scoop.
3. Remove the guide rails as follows:
- Remove the nylon screws
- Remove the guide rails from the canopy
window.
4. Remove the sliding window as follows:
- Remove the screws
- Remove the hinge block
- Remove the sliding window knob
- Remove the sliding window.
DA201-C1
Rev 16
Detail Steps/Work Items
52-10-00
Key Items/References
Refer to Figure 203.
Refer to Figure 203.
Refer to Figure 203.
Refer to Figure 203.
Maintenance Practices
Page 205
30 Oct 09