General - Diamond DA20-C1 Maintenance Manual

DA20-C1 AMM
1.

General

The following maintenance practices describe how to remove and install the flaps. Refer to Chapter
27-50 for data on adjusting the flap controls.
2. Remove/Install the Flap
A. Remove the Flap
CAUTION:
1. Lower the flaps.
- Set the BAT/GEN switch to ON
- Set the flap selector to LDG
- When the flaps stop moving:
- Set the BAT/GEN switch to OFF.
2. Remove the bolt which attaches the control rod
to the flap horn.
3. Remove the pivot bolts from the hinges and the
flap horn.
4. Remove the flap from the aircraft.
DA201-C1
Rev 16
FLAPS - MAINTENANCE PRACTICES
Detail Steps/Work Items
MAKE SURE THAT THE AREA UNDER THE FLAPS IS CLEAR
BEFORE YOU MOVE THE FLAPS.
57-50-00
Key Items/References
Hold the flap.
Hold the flap.
Maintenance Practices
Page 201
30 Oct 09