Diamond DA20-C1 Maintenance Manual page 122

Maintenance Practices
CAUTION:
9. Move the wing outboard a small distance.
10. Let the trestle hold the weight of the wing.
11. Disconnect the electrical connector forward of
the spar.
12. Disconnect the stall-warning hose forward of
the spar.
13. Disconnect the pitot hose forward of the spar.
14. Disconnect the static hose forward of the spar.
CAUTION:
15. Move the wing away from the fuselage. Put the
wing in the wing stand.
16. If necessary, do this procedure again for the
other wing.
Page 202
01 Nov 10
Detail Steps/Work Items
DO NOT LIFT ON THE FLAP. ONLY LIFT ON THE WING
STRUCTURE. OTHERWISE YOU MAY DAMAGE THE FLAP.
DO NOT LIFT ON THE FLAP. ONLY LIFT ON THE WING
STRUCTURE. OTHERWISE YOU MAY DAMAGE THE FLAP.
57-10-00
Key Items/References
To give access to the connections at the
wing root. Use one person on the wing tip,
one person at the wing-root leading-edge,
and one person at the wing-root trailing-
edge.
Left wing only.
The hose is 3/8 in. (10 mm) diameter.
(Transparent Color)
Left wing only.
The hose is 5/16 in. (8 mm) diameter.
(Green Color)
Left wing only.
The hose is 5/16 in. (8 mm) diameter.
(Purple Color)
Use one person on the wing tip, one person
at the wing-root leading-edge and one
person at the wing-root trailing-edge.
DA20-C1 AMM
DA201-C1
Rev 17