15.
wireless-status light
17.
hard-drive activity light
19.
speakers
21.
smart-card reader (optional)
23.
security-cable slot
25.
service-tag label
Removing the Base Cover
1.
Follow the procedures in
2.
Perform the following steps to remove the base cover from the computer:
a. Remove the screws that secure the base cover to the computer.
b. Lift the base cover from its edge and remove the base cover from the computer.
NOTE: You may need a sharp tool to pry the base cover from its edge.
Installing the Base Cover
1.
Place the base cover to align with the screw holders on the computer.
2.
Tighten the screws to secure the base cover to the computer.
3.
Follow the procedures in
Removing the Battery
1.
Follow the procedures in
2.
Remove the
base
cover.
3.
Disconnect the battery cable from its connector [1] and release the cable from its routing channel [2].
8
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
16.
battery-status light
18.
power-status light
20.
touchpad
22.
headset connector
24.
dock connector (optional)
Computer.
Computer.
Computer.