Table of Contents
Advertisement
a.
base cover
b.
battery
c.
keyboard trim
d.
keyboard
e.
palmrest
3.
Perform the following steps to remove the audio board from computer:
a. Disconnect the audio-board cable from its connector on the system board [1] [2].
b. Release the speaker cable from the audio board [3].
c. Remove the screws that secure the audio board to the computer [4].
d. Lift and remove the audio board from the computer [5].
Installing the Audio Board
1.
Insert the audio board into its place on the computer.
2.
Tighten the screws to secure the audio board to the computer.
3.
Route the speaker cable through the routing channel.
4.
Connect the audio-board cable to its connector on the system board.
5.
Install the:
a.
palmrest
b.
keyboard
c.
keyboard trim
d.
battery
e.
base cover
6.
Follow the procedures in
Removing the System Board
1.
Follow the procedures in
2.
Remove the:
a.
base cover
b.
battery
c.
memory
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
37
Hide quick links:
Advertisement
Table of Contents
