6
Select "General".
7
If DHCP Default is set to "Yes",
change the setting to "No", and
then select "OK".
8
Enter the IP Address, and then
select "OK".
Ex: 192.168.1.111
1
●
When entering a 1 or 2-digit number segment,
add "00" or "0" in front of the number to scroll
to the next segment of numbers, or press the
"
" key on the Control Panel to enter a
period after the number.
●
To correct a mistake, press
move the cursor to the right side of the
incorrect address.
To delete, press "Clear", and re-enter the
correct address.
Continue on the next page...
2
or
to
5