Panasonic DP-C354 Operating Instructions Manual page 38

Setting up Optional Accessories
Email/Internet Fax Settings
■ ■ ■ ■ ■ Setting up the Network Configuration
8
Enter the SMTP Server Name using
the Keyboard, and then select "OK".
(Up to 60 characters.)
●
If you select "No" for DNS Server Address
in step 11 on page 6, the SMTP Server IP
address is required instead of the SMTP
Server name.
Enter the SMTP Server IP Address
using the Keypad, and then select
"OK".
●
When entering a 1 or 2-digit number segment,
add "00" or "0" in front of the number to scroll
to the next segment of numbers, or press the
" " key on the Control Panel to enter a
period after the number.
●
To correct a mistake, press
move the cursor to the right side of the
incorrect address.
To delete, press "Clear", and re-enter the
correct address.
38
2
1
1
2
or to
9
Enter the Port Number, and then
select "OK".
1
10
Select "Invalid" or "Valid" for
"SMTP Authentication", and then
select "OK".
1
●
"SMTP Authentication" is the specification
which added the user authentication
function to SMTP. Attestation of a user
account and a password is performed
between an SMTP server and a user in the
case of e-mail reception, and only when
attested, transmission of e-mail is permitted.
●
When "Valid" is selected, proceed to step
11.
●
When "Invalid" is selected, proceed to step
13.
2
2