Panasonic DP-C354 Operating Instructions Manual page 35

6
Select "01 Logo", and then enter
your company's name or your name
as a Logo using the Keyboard.
(Up to 25 characters)
●
To correct a mistake, select [ ] or [ ] to
move the cursor to the right side of the
incorrect character. To delete, select "Back
Space", and re-enter the correct character.
Your company name or your name must be
set as your Logo because it is required by
the Telephone Consumer Act of 1991.
7
Select "02 Character ID", and then
enter your Character ID using the
Keyboard. (Up to 16 characters)
●
To correct a mistake, select [ ] or [ ] to
move the cursor to the right side of the
incorrect character. To delete, select "Back
Space", and re-enter the correct character.
8
Select "03 ID No.", and then enter
your fax number as the ID No. using
the Keypad. (Up to 20 digits)
●
To correct a mistake, "Clear" to delete
entries one digit at a time, and re-enter the
correct number.
Select " " in the beginning of the ID Number
to add a "+" symbol, followed by your Country
Code digit. Select "Space" to enter a blank
space.
Ex: +1 201 555 1212
(where, +1 is USA's country code)
+81 3 111 2345
(where +81 is Japan's country code)
Your fax number must be set as your ID
number because it is required by the
Telephone Consumer Act of 1991.
9
Press the Reset key.
35