Panasonic DP-C354 Operating Instructions Manual page 23

5
Select "I accept the terms of the
license agreement", and then click
"Next".
1
●
Make sure that your machine is connected
to the network properly, and/or the Power
Switch is ON before clicking "Next".
6
Click "Next".
●
The above Screen will not be shown if there
is another model's Panasonic Document
Management System installed.
7
Click "Next".
●
2
8
The Wizard automatically searches
for machines connected to your
network, and displays the found units
in the Network Fax Device window.
Select your network FAX, and then
click "Next".
●
●
The above Screen will not be shown if there
is another model's Panasonic Document
Management System installed.
2
1
Only the machines connected to the same
subnet can be used as a network MFP.
If your machine has not been connected to
the network yet, enter its allocated IP
Address, and then click "Next" to proceed
with the installation.
Continue on the next Page...
23