To Change The Main Jet - Miele CS 1028 Operating And Installation Instructions

Conversion to another type of gas

To change the main jet

^ Undo the two screws a of the burner
pipe on the underside of the
appliance.
^ Pull off burner pipe b.
^ Unscrew air intake sleeve c.
50
^ Whilst counterholding it in place with
an SW 00 spanner, unscrew the main
jet c anti-clockwise from its housing
using an SW 7 spanner (see
illustration).
^ Screw in the new main jet, once
again using the spanner to
counterhold the jet housing.
Reassemble the parts in the reverse
order and check for leaks by operating
the burner without the upper part of the
hob in place (use a match to ignite the
flame).