Miele CS 1028 Operating And Installation Instructions page 12

Warning and Safety instructions
~
The connection to the gas supply should only be
undertaken by an registered gas installer under the gas
safety regulations (Registration of Gas Installers and
Gas Contractors). If the appliance is supplied without a
plug, or if the plug is removed, it must be connected to
the mains electricity supply by a suitably qualified and
competent electrician in strict accordance with current
local and national safety regulations. The manufacturer
cannot be held liable for damage caused by incorrect
installation or connection.
~
Installation, maintenance and repairs may only be
carried out by a suitably qualified and competent
person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could
be dangerous. The manufacturer cannot be held liable
for unauthorised work.
~
During installation, maintenance and repair work, the
hob must be disconnected from the gas supply and
mains electricity supply.
~
While the hob is under guarantee, repairs should
only be undertaken by a service technician authorised
by Miele. Otherwise the guarantee is invalidated.
12