Safety Instructions For Installation - Miele CS 1028 Operating And Installation Instructions

Safety instructions for installation

This appliance must be installed and
connected to services in
accordance with local and national
safety and building regulations.
To avoid the risk of damaging the
hob fit the wall units and extractor
hood before installing it.
~
The room in which the gas hob is
installed must be at least 20 m
with a door or window in it which can
be opened to the outside air.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~
This appliance must not be used in
a non-stationary location (e.g. on a
ship).
~
An electric fryer must not be
installed directly next to a gas hob, as
the gas flames could ignite the fat in the
fryer. It is essential to maintain a
distance of at least 288 mm between
these two appliances.
~
A gas hob may not be built in over a
fridge, fridge freezer, freezer,
dishwasher, washing machine or
tumble dryer.
~
The hob may only be installed
above a Miele oven if the worktop is at
least 40 mm thick.
30
~
Ensure that the gas pipe and
electrical cable are installed in such a
way that they do not touch any parts of
the appliance which become hot. This
could cause damage.
~
The electrical cable and any flexible
gas connection pipes must be installed
in such a way so that they do not come
into contact with any moving kitchen
parts (e.g. a drawer), and cannot
become trapped.
3
in size
~
Observe carefully the safety
distances given on the following pages.
All dimensions in this instruction booklet
are given in mm.