CAUTION
Ensure that the cable bundle is not pinched when re-installing it between the
■
bodywork and the light – risk of damage to the electric installation and water in-
gress.
If you are not sure whether the cable bundle was not pinched, we recomment
■
you have the connection to the light checked by a ŠKODA partner.
Replacing bulbs in rear light (Octavia)
Fig. 221 Outer part of the light: Basic light/light with LED diodes
Fig. 222 Inner part of the light: Basic light/light with LED diodes
238
Do-it-yourself
First read and observe the introductory information and safety warn-
ings
on page 234.
Outer part of the light
›
Turn the bulb holder
» Fig. 221
2
ing.
›
Replace the bulb, insert the holder with the bulb into the lamp housing and turn
in a clockwise direction to the stop.
Inner part of the light
›
Unscrew the lamp holder
» Fig. 221
tool kit, and remove the lamp holder from the tail light assembly.
›
Turn the bulb holder anti-clockwise up to the stop and remove it from the lamp
housing
» Fig. 221
- or .
›
Replace the bulb, insert the holder with the bulb into the lamp housing and turn
in a clockwise direction to the stop.
›
Insert the bulb holder in the tail lamp assembly.
›
Screw on the lamp holder carefully.
anti-clockwise remove it from the lamp hous-
- or with the screwdriver from the car