Settings
Activation/deactivation
The function is activated or deactivated in the fol-
lowing menu in the Infotainment system.
Or:
Replace light bulbs
What you should be mindful of
DIY replacement of the following bulbs is possible.
Have the remaining light sources replaced by a spe-
cialist garage.
The new bulb must conform to the specification of
the original light bulb. The name of the bulb is
marked on the bulb socket.
After changing a bulb in the low beam light, the main
beam or fog light, have the headlights adjusted by a
specialist garage.
CAUTION
Halogen lamps are pressurised and can burst during
replacement!
Wear gloves and safety goggles.
▶
NOTICE
Contamination of the halogen lamp reduces the life
of the lamp!
Do not touch the glass of the light bulb with your
▶
bare fingers.
NOTICE
Danger of headlight damage due to the ingress of
water and dirt!
Always fit the protective cap on the headlight cor-
▶
rectly after changing a bulb.
Conditions for changing a bulb
✓ Ignition switched off.
✓ Light switched off.
Lighting, windscreen wipers and washers ›
Low beam
›
Fit the protective cap on the headlight again.
Main beam and side lights
Remove protective cap from headlight
Replace light bulbs
51
›
Remove the protective
cap from the headlight.
›
Turn and remove the
socket with the bulb.
›
Remove the bulb from
the socket.
›
Insert a new bulb into
the socket so that the
fixing lug
snaps into
A
the recess on the bulb.
›
Insert the socket with
the light bulb into the
headlight and turn it
clockwise
to secure.
›
Remove the protective
cap.