Luggage compartment cover
Fig. 84 Removing/installing the luggage compartment cover
First read and observe the introductory information and safety warn-
ings
on page 79.
Removing
›
Unhook the support straps
» Fig.
1
›
On the underside of the cover, in the area between the holders, press
›
Remove the cover.
Install
›
Place the cover on the contact surfaces of the side trim panel.
›
The mounts of the cover
» Fig. 84
3
of the side trim panel.
›
Press on the upper side of the cover so that the mounts fully interlock in the
holders.
›
Hook the support straps
on the boot lid.
1
The removed boot cover can be stowed behind the seat backrest
84
Using the system
Fig. 85
Luggage compartment cover
stowed behind the rear seats
84.
2
must be positioned above the holders
» Fig.
85.
WARNING
No objects should be placed on the luggage compartment cover, the vehicle
occupants could be endangered if there is sudden braking or the vehicle col-
lides with something.
CAUTION
Please ensure that the heating elements for the rear window heater are not
■
damaged as a result of objects placed in this area.
When closing the boot lid, jamming and damage to the luggage compartment
■
cover or the side trim panel can occur if handled in an unprofessional way. The
following guidelines must be observed.
The mounts of the cover
■
side trim panel
.
2
The items which are transported must not exceed the height of the luggage
■
compartment cover.
The cover must not be jammed in the seal of the boot lid when it is in the
■
opened position.
There must be no object in the gap between the opened cover and the rear
■
backrest.
Note
Opening the boot lid also lifts up the boot cover.
.
2
» Fig. 84
must be interlocked in the holders of the
3