Program System Speed Dial Numbers - Samsung DS24D User Instruction

PROGRAM SYSTEM SPEED DIAL
NUMBERS
The system list starts with 200 numbers and can be increased in blocks of
ten. The maximum amount is 300 numbers if no more than 200 station speed
dial numbers are assigned. See your service company to increase or
decrease the system list.
–
The speed dial codes are 500 799. Each speed dial number consists of a
line access code and the telephone number to be dialed. The access code
can be any line group, individual line, station group or individual extension.
The speed dial number can be up to 24 characters long including
FLASH and PAUSE.
NOTE: If Least Cost Routing (LCR) is being used, the LCR access code must
be entered.
When you are entering a speed dial number, there are some special keys
that you will need to use. These are the bottom six programmable keys on
the right hand side of the DS 24D keyset. These keys are known as A, B, C,
D, E, and F (see the DS 24D Keyset User Guide, Dialing
PROGRAM KEYS
UP & DOWN - Select the speed dial bin.
KEYPAD - Used to enter number.
Hold - Press to clear entry.
Speaker - Save data and advance to next program.
A - Does not have a function.
B - Inserts a FLASH.
C - Inserts a PAUSE.
D - Changes the dialing type from pulse to tone.
E - Hides and displays digits.
F - Enters the speed dial name.
17
Open customer programming and follow the instructions below.
ACTION
1. Press Transfer and then dial 705
2. Dial the speed bin desired (e.g., 505) OR
3. Enter the access code (e.g., 9—the system
, #,
4. Press the F key to toggle to
5. Press Transfer to store and exit
Features).
DEFAULT DATA: NO SPEED NUMBERS ASSIGNED
Home Page
Display shows the first number
press UP or DOWN to choose and
press the right soft key to move the cursor
will automatically insert a dash) followed by
the phone number (up to 24 digits long)
and press the right soft key to return to
step 2
Program
System Speed Dial Names, step 3 to
enter the name
programming OR press Speaker to store
and advance to the next program
System Admin
Table of Contents
DISPLAY
SYS SPEED DIAL
500:
SYS SPEED DIAL
505:
SYS SPEED DIAL
505:9–121223456789
SYS SPEED NAME
505:
18