Samsung DS24D User Instruction page 63

Keyset
Hide thumbs Also See for DS24D:
Table of Contents

Advertisement

PROGRAMMED MESSAGES
When you will be away from your phone for any length of time, you can leave
a programmed station message. Display stations calling you will see this
message and be informed of your status or follow your instructions.
Dial 48 plus any of the message codes (01–30) listed on the back of this
user guide.
To cancel any of these messages you might have selected, dial 48 plus
00.
Press TRANSFER to exit and store your selection.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKER key.
You can have multiple programmed message keys (PMSG) and each one
can have a different message code:
Press any programmed message (PMSG) button. The message is set
and the button will light red. Press the button again to turn off.
Pressing another programmed message (PMSG) button will turn the
previous one off and set a different programmed message.
30
Home Page
CONVENIENCE FEATURES
DO NOT DISTURB
Use this feature when you want to block calls to your keyset.
While on-hook, press the DND key or dial 401. The DND key lights
steady red to remind you of this mode.
To cancel DND, press the DND key again or dial 400. The DND light
turns off. You can make calls while in the DND mode.
NOTES:
1. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKER key.
2. If you place your keyset in DND mode and you do not have a DND key,
your TSI key will flash to indicate DND status.
ONE TIME DND
If you are on a call and you do not wish to be interrupted while on that call,
you can press the DND key and place your station in Do Not Disturb. When
you hang up at the end of the call, DND will be automatically canceled and
your keyset will be able to receive new calls. This feature requires a DND
key.
MUTE
You can mute the handset transmitter or the microphone during any conver-
sation:
Press the MUTE key. It will light red.
To resume speaking, press the MUTE button again. The light turns off.
BACKGROUND MUSIC
When a music source is supplied, you may listen to music through the
speaker in your keyset:
While on-hook, press the HOLD button to hear music.
Press the HOLD button again to turn music off.
You can set the level of background music by using the VOLUME keys while
listening to the music. This does not affect the speakerphone level.
Table of Contents
iDCS Keyset
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents