Setting Station On/Off Options - Samsung DS24D User Instruction

DS 616
TECHNICAL MANUAL

1.12 SETTING STATION ON/OFF OPTIONS

The following options may be turned on and off at your keyset.
0. AUTO HOLD
1. AUTO TIMER
2. HEADSET USE
3. HOT KEYPAD
4. KEY TONE
5. PAGE REJOIN
6. RING PREF.
7. NOT CONT CID
8. AME PSWD
Automatically places an existing C.O. call on hold if the
CALL button, trunk key or trunk route key is pressed during
that call. This will not affect the Auto Hold part of transfer
and park/page.
Automatically starts the stopwatch timer immediately when a
C.O. call is answered or after a short delay on an outgoing
call.
When on, this feature disables the hook switch, allowing a
headset user to answer all calls on the headset without
requiring to lift the handset.
When on, this feature allows the user to dial directory
numbers without having to first lift the handset or press the
Speaker button.
Allows the user to hear a slight tone when pressing buttons
on the set.
This feature allows keyset users to hear the remaining
portion of an ongoing internal page or all page over the
speaker of their keysets after they return their keysets to
idle. To enable this feature, follow the procedure below.
When off, this feature requires the user to press the fast
flashing button to answer a ringing call after lifting the
handset.
When enabled (set to ON), Caller ID information will not be
displayed on keyset for the duration of the call, but only for a
short period after the call is answered.
disabled, it is suggested that the station auto timer be
disabled. This prevents display corruption.
If this option is set to YES, station users who have AME set
must enter their station password to listen to messages
being left.
1.14
Table of Contents
Home Page
USER INSTRUCTIONS
PART 1 JUNE 2004
Note: When