Set Date And Time Display; Reset Station Passcodes To Default - Samsung DS24D User Instruction

SET DATE AND TIME DISPLAY

Should it ever become necessary to correct the date and time displayed on
all of the keysets, do so as soon as you notice that they are incorrect. Auto-
matic Operating Mode will not work correctly and SMDR records will be of
no value when the date and time are not correct.
The display format is the following:
W (Day of the week): Enter 0 for Sunday and 6 for Saturday.
MM (Month): Enter 01 for January and 12 for December.
DD (Day of the month): Enter a number in the range of 01–31.
YY (Year): Enter the last two digits of the year.
HH (Hours): Use the 24 hour clock and enter a number in the range of
00–24.
MM (Minutes): Enter a number in the range of 00–59.
Failure to enter the time using the 24 hour clock will cause the date to
change at 12:00 P .M. Open customer programming and follow the instruc-
tions below.
ACTION
1. Press Transfer and then dial 505
Display shows
2. Enter the new time and date using
the above format
3. Verify the time and date and reenter
them if necessary
4. Press the right soft key to return to step 2
OR Transfer to store and exit
programming OR press Speaker to store
and advance to the next program
If you have entered invalid data, you will receive an [ INVALID ENTRY ] mes-
sage for three seconds. Reenter the correct date and time. If the information
you entered is incorrect, repeat the procedure.
11
DISPLAY
OLD:1060198:1220
NEW:WMMDDYY:HHMM
OLD:1060198:1220
NEW:2070798:1545
OLD:2070798:1545
NEW:WMMDDYY:HHMM
Home Page
RESET STATION PASSCODES
TO DEFAULT
Individual keyset users can set or change their own individual passcodes.
These passcodes are used to lock and unlock keysets, override toll restric-
tion and access the DISA feature. At times, it may be necessary for the sys-
tem administrator to reset a station's passcode to default "1234." This pro-
gram cannot be used to display passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN - Select the extension number.
Hold - Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION
1. Press Transfer and then dial 101
Display shows
2. Dial the station number OR use the
UP and DOWN keys to scroll through
the keyset numbers and press the
right soft key to move the cursor right
3. Press Hold to reset the passcode
4. Press the right soft key to return to
step 2 OR press Transfer to store and exit
programming OR press Speaker to
store and advance to the next program
DEFAULT DATA: ALL STATION PASSCODES = 1234
System Admin
Table of Contents
DISPLAY
[201] PASSCODE
PASSCODE:
[205] PASSCODE
PASSCODE:
[205] PASSCODE
PASSCODE : 1234
12