Refilling Saddle Stitch Finisher Mj-1029 Staples - Toshiba e-studio556 Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
Pull out the seal bundling the staples straight.
5
Fit the staple cartridge into the stapler.
6
Insert the cartridge until the lever of the stapler goes up to be fixed
securely.
Close the front cover of the finisher.
7
If the message "Check staple cartridge" remains, repeat the procedure above from steps 1 to 7.
 Refilling Saddle Stitch Finisher MJ-1029 staples
The Saddle Stitch Finisher MJ-1029 has two types of staple cartridges; one is for 100-sheet staples and the other is for
50-sheet ones. If you replace the staple cartridge with the other type, turn the power of the equipment OFF and then
back ON after replacing it.
Open the front cover of the finisher.
1
Fully raise the lever of the staple cartridge, and pull
2
the cartridge out.
46 Refilling With Staples
1
2