Table of Contents
Advertisement
installation
PLEASE READ AND REFER TO INSTALLATION INSTRUCTIONS UNIT PREPARATION ON PAGE 16
Top of Unit prior to installation of the flue. The packaging material has been
removed
1. 6" starter flue fitted. Note the crimped end is down (into unit)
2. 6" Flue fitted. Note: crimped end is down. Must connect active pipe using
stainless steel rivets or self drilling screws. 2 for each join..
12
FLUE AND CHIMNEY REQUIREMENTS
3. 8" inner galvanized skin fitted. The flue sits down in the box. Note: Crimped
end is up.
4. 10" galvanized flue skin fitted. The 10" skin sits on top of the box over
ventilation holes in plate. Note: Crimped end is up.
5. Bend up the 2 tabs on each side of the 10" flue and secure via self drill-
ing screws
Montrose Woodfire
Advertisement
Table of Contents
