Specifi Cations - Linak ACTUATOR LA36 User Manual

Specifications
Motor:
Motor protection:
Cable:
Gear ratio:
Slip clutch:
Brake:
Hand crank:
Housing:
Spindle part:
Temperature range:
End play:
Weather protection:
* BUS actuators only 24V - please see the installation guide.
** Special control cabels for BUS actuator - please see the installation guide.
Permanent magnet motor 12, 24, or 36V *
Automatic protection resets thermal overload (Option)
Motor: 2 x 14 AWG PVC cable
Control: 6 x 20 AWG PVC cable **
6 different gear ratios available in steel
(500 N, 1,700 N/2,600 N, 4,500 N, and 6,800/10,000 N)
Mechanical - overload protection through an integrated slip
clutch is optional adjusted to 1.2-1.4 times max. load
Integrated brake ensures a high self-locking ability.
The brake is deactivated when the actuator is powered in
order to obtain a high effi ciency
As a standard feature the actuator can be operated manually
The housing is made of casted aluminium, coated for
outdoor out and in harsh conditions
Outer tube: Extended aluminium anodised
Inner tube: Stainless steel AISi304/SS2333
Acme spindle: Trapezoidal spindle with high effi ciency
- 30 o C to +65 o C
o o
- 22 F to +150 F
Full performance +5
2 mm maximum
Rated IP66 for outdoor use. Furthermore, the actuator can
be washed down with a high-pressure washer.
o o
C to +40 C
9