Easylink Setup - Philips BDP2500 User Manual

Restrict access to discs that are unsuitable for children. These types of discs must be recorded with
ratings.
To access, enter your last set password or '0000'.
Note
•
Rated discs above the level you set in
•
The ratings are country-dependent. To allow all discs to play, select '
•
Some discs have ratings printed on them but are not recorded with ratings. This function has no
effect on such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to protect the TV screen from being damaged due
to over exposure to static image for being too long.
• [On] - Set the screen saver active after 10 minutes of inactivity (for example, in the pause or
stop mode)
• [Off] - Disable screen saver mode.
[Change Password]
Set or change the password.
1) Press the Numeric buttons to enter the password or your last set password. If you forget the
password, enter '0000', then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confirm] in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
• [Normal] - Normal brightness.
• [Dim] - To dim display.
[Auto Standby]
Turn on or off auto standby mode. It is an energy saving feature.
• [On] - Switch to standby after 30 minutes of inactivity (for example, in pause or stop mode).
• [Off] - Disable auto standby mode.
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs with PBC (playback control) feature.
• [On] - Display the index menu when you load a disc for play.
• [Off] - Skip the menu and start play from the first title.

EasyLink Setup

1
Press .
2
Select [Settings], then press OK.
3
Select [EasyLink Setup], then press .
[Parental Control] require a password to be played.
8' for DVD-video and BD-Video.