Table of Contents
Advertisement
Note
•
Rated discs above the level you set in
require a password to be played.
•
The ratings are country-dependent. To allow all discs to
play, select '8' for DVD-video and BD-Video.
•
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
•
[On] - Set the screen saver active after 10
minutes of inactivity (for example, in the pause
or stop mode)
•
[Off] - Disable screen saver mode.
[Change Password]
Set or change the password.
1) Press the Numeric buttons to enter the
password or your last set password. If you forget
the password, enter '0000', then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confirm] in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
•
[Normal] - Normal brightness.
•
[Dim] - To dim display.
[Auto Standby]
Turn on or off auto standby mode. It is an energy
saving feature.
•
[On] - Switch to standby after 30 minutes
of inactivity (for example, in pause or stop
mode).
•
[Off] - Disable auto standby mode.
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
•
[On] - Display the index menu when you load
a disc for play.
•
[Off] - Skip the menu and start play from the
first title.
20
EN
[Parental Control]
EasyLink Setup
1
Press
.
2
Select [Settings], then press OK.
3
Select [EasyLink Setup], then press .
4
Select an option, then press OK.
5
Select a setting, then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press
[EasyLink]
This product supports Philips Easylink which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
•
[On] - Turn on EasyLink features.
•
[Off] - Disable EasyLink features.
[One Touch Play]
When you press the STANDBY
on this product, the TV (if the TV supports one-
touch play) automatically turns on and switches to
the video-in channel. Disc play starts if there is a
disc in this product.
•
[On] - Turn on one-touch play feature.
•
[Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold the STANDBY
all the connected HDMI CEC devices (if the device
supports one-touch standby) switch to standby
mode simultaneously.
•
[On] - Turn on one-touch standby feature.
•
[Off] - Disable one-touch standby feature.
Note
•
You must turn on the HDMI CEC operations on the TV/
devices before you can enjoy the EasyLink controls. See
the TV/devices manual for details.
•
Philips does not guarantee 100% interoperability with all
HDMI CEC compliant devices.
.
button to turn
button,
Advertisement
Table of Contents
