Preference Setup; Easylink Setup - Philips BDP3000/12 User Manual

Preference Setup

1
Press .
2
Select [Settings], then press OK.
3
Select [Preference Setup], then press .
4
Select an option, then press OK.
5
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press
[Menu Language]
Select an on-screen menu language.
Note
•
If this product is connected to an HDMI CEC compliant
TV using a HDMI cable, it switches automatically to the
same menu display language as per your TV setting (if the
language set on TV is supported by this product).
[Parental Control]
Restrict access to discs that are unsuitable for children.
These types of discs must be recorded with ratings.
To access, enter your last set password or '0000'.
Note
•
Rated discs above the level you set in
require a password to be played.
•
The ratings are country-dependent. To allow all discs to
play, select '8' for DVD-video and BD-Video.
•
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
• [On] - Set the screen saver active after 10
minutes of inactivity (for example, in the pause
or stop mode)
[Off] - Disable screen saver mode.
•
[Change Password]
Set or change the password.
.
[Parental Control]
1) Press the Numeric buttons to enter the
password or your last set password. If you forget
the password, enter '0000', then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confirm] in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
[Normal] - Normal brightness.
•
• [Dim] - To dim display.
[Auto Standby]
Turn on or off auto standby mode. It is an energy
saving feature.
• [On] - Switch to standby after 30 minutes of
inactivity (for example, in pause or stop mode).
• [Off] - Disable auto standby mode.
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
[On] - Display the index menu when you load
•
a disc for play.
[Off] - Skip the menu and start play from the
•
first title.

EasyLink Setup

1
Press .
2
Select [Settings], then press OK.
3
Select [EasyLink Setup], then press .
4
Select an option, then press OK.
5
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press
[EasyLink]
This product supports Philips Easylink which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
.
EN
19