Philips BDP2500 User Manual page 30

Video Setup
Audio Setup
Preference Setup
EasyLink Setup
Advanced Setup
4
Select an option, then press OK.
5
Select a setting, then press OK.
• To return to the previous menu, press
• To exit the menu, press
[EasyLink]
This product supports Philips Easylink which uses the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control to control all EasyLink-compliant devices that are
connected through HDMI connectors.
• [On] - Turn on EasyLink features.
• [Off] - Disable EasyLink features.
[One Touch Play]
When you press the STANDBY button to turn on this product, the TV (if the TV supports one-
touch play) automatically turns on and switches to the video-in channel. Disc play starts if there is
a disc in this product.
• [On] - Turn on one-touch play feature.
• [Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold the STANDBY button on the remote control, all the connected HDMI
CEC devices (if the device supports one-touch standby) switch to standby mode simultaneously.
• [On] - Turn on one-touch standby feature.
• [Off] - Disable one-touch standby feature.
Note
•
You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink
controls. See the TV/devices manual for details.
•
Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices.
EasyLink
One Touch Play
One Touch Standby
.
On
On
On
BACK.