Table of Contents
Advertisement
[Parental Control]
Restrict access to discs that are unsuitable for children.
These types of discs must be recorded with ratings.
To access, enter your last set password or '0000'.
Note
Rated discs above the level you set in [Parental Control]
require a password to be played.
The ratings are country-dependent. To allow all discs to
play, select '8' for DVD-video and BD-Video.
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
[On] - Set the screen saver active after 10
[Off] - Disable screen saver mode.
[Change Password]
Set or change the password.
password or your last set password. If you forget
the password, enter '0000', then press OK.
in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
[Normal] - Normal brightness.
[Dim] - To dim display.
[Auto Standby]
Turn on or off auto standby mode. It is an energy
saving feature.
[On] - Switch to standby after 30 minutes
[Off] - Disable auto standby mode.
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs
[On] - Display the index menu when you load
a disc for play.
[Off] - Skip the menu and start play from the
EasyLink Setup
1
Press
.
2
Select [Settings], then press OK.
3
Select [EasyLink Setup], then press .
4
Select an option, then press OK.
5
Select a setting, then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press
[EasyLink]
This product supports Philips Easylink which uses
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
[On] - Turn on EasyLink features.
[Off] - Disable EasyLink features.
[One Touch Play]
When you press the STANDBY
the video-in channel. Disc play starts if there is a
disc in this product.
[On] - Turn on one-touch play feature.
[Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold the STANDBY
on the remote control, all the connected HDMI
[On] - Turn on one-touch standby feature.
[Off] - Disable one-touch standby feature.
Note
You must turn on the HDMI CEC operations on the TV/
devices before you can enjoy the EasyLink controls. See
the TV/devices manual for details.
Philips does not guarantee 100% interoperability with all
HDMI CEC compliant devices.
.
button to turn
button
EN
19
Advertisement
Table of Contents
