Play A Disc - Philips BDP2500 User Manual

»
The TV (if supports one-touch play) automatically turns on and switches to the correct
video-in channel.
»
If a disc is loaded in this product, disc play automatically starts.
One-touch standby
1
Press and hold the STANDBY button on the remote control for more than 3 seconds.
»
All the connected devices (if the device supports one-touch standby) automatically switch
to standby.
Note
•
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
5 Play

Play a disc

Caution
•
Do not place any objects other than discs into the disc compartment.
•
Do not touch the disc optical lens inside the disc compartment.
1
Press to open the disc compartment.
2
Insert a disc with its label facing up.
3
Press to close the disc compartment and start disc play.
• To view disc play, turn on the TV to the correct viewing channel for this product.
• To stop disc play, press
Note
•
Check disc/file formats supported (see "Your product" > "Playable media").
•
If the password entry menu is displayed, enter the password before you can play the locked or
restricted disc (see "Adjust settings" > "Preference Setup" > [Parental Control]).
•
If you pause or stop a disc, the screen saver appears after 10 minutes of inactivity. To deactivate the
screen saver, press any button.
•
After you pause or stop a disc and no button is pressed within 30 minutes, this product automatically
switches to standby.
.