Easylink Setup - Philips BDP3000 User Manual

Note
Rated discs above the level you set in [Parental Control]
require a password to be played.
The ratings are country-dependent. To allow all discs to
play, select '8' for DVD-video and BD-Video.
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
[On] - Set the screen saver active after 10
[Off] - Disable screen saver mode.
[Change Password]
Set or change the password.
password or your last set password. If you forget
the password, enter '0000', then press OK.
in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
[Normal] - Normal brightness.
[Dim] - To dim display.
[Auto Standby]
Turn on or off auto standby mode. It is an energy
saving feature.
[On] - Switch to standby after 30 minutes
[Off] - Disable auto standby mode.
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs
[On] - Display the index menu when you load
a disc for play.
[Off] - Skip the menu and start play from the

EasyLink Setup

1
Press .
2
Select [Settings], then press OK.
3
Select [EasyLink Setup], then press .
4
Select an option, then press OK.
5
Select a setting, then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press
[EasyLink]
This product supports Philips Easylink which uses
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
[On] - Turn on EasyLink features.
[Off] - Disable EasyLink features.
[One Touch Play]
When you press the STANDBY
the video-in channel. Disc play starts if there is a
disc in this product.
[On] - Turn on one-touch play feature.
[Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold the STANDBY
on the remote control, all the connected HDMI
[On] - Turn on one-touch standby feature.
[Off] - Disable one-touch standby feature.
Note
You must turn on the HDMI CEC operations on the TV/
devices before you can enjoy the EasyLink controls. See
the TV/devices manual for details.
Philips does not guarantee 100% interoperability with all
HDMI CEC compliant devices.
.
button to turn
button
EN 19