Disassembly - Pride Mobility Legend XL Owner's Manual

V I I I . D I S A S S E M B L Y

DISASSEMBLY

You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the
basket, and the batteries. See figure 14. No tools are required to disassemble or assemble your scooter. Since the
disassembled sections of the scooter take up more floor space than the assembled unit, place the scooter on a
level, dry surface with sufficient room to move the parts around. Keep in mind that you may need assistance to lift
some of the scooter components.
BATTERIES
Figure 14. The Scooter Disassembled
WARNING! Lifting weight beyond your physical capability may result in personal injury.
Ask for assistance when necessary while disassembling or assembling your scooter.
1. Place the manual freewheel lever in the drive position.
2. Lift the seat up and off the scooter.
3. Gently pull the shroud up and off of the rear section
of the scooter.
4. Disconnect the battery strap.
5. Unplug both T-handle battery harnesses. See figure
15.
6. Remove the batteries.
7. Unplug the front-to-rear harness. See figure 15.
WARNING! Failure to unplug both T-
handle battery harnesses and the
front-to-rear
separating the front and rear sections
could result in permanent damage to
the scooter.
Legend XL
SEAT
REAR SHROUD
BASKET
har ness prior
www.pridemobility.com
A N D
REAR SECTION
FRONT SECTION
to
Figure 15. Harness Connections
A S S E M B L Y
T-HANDLE BATTERY HARNESS
FRONT-TO-REAR HARNESS
T-HANDLE BATTERY HARNESS
31