Seatback Angle Adjustment; Seat Height Adjustment; Comfort Adjustments - Pride Mobility Legend XL Owner's Manual

V I I .

SEATBACK ANGLE ADJUSTMENT

WARNING!
scooter with the seatback in a
reclined position.
WARNING! Keep your back pressed
firmly against the seatback while
adjusting the angle.
To adjust your scooter's reclining seat, perform these
steps. See figure 12B.
1. With your back pressed up against the seatback,
lift up on the seatback adjustment lever and lean
forward or rearward to adjust the seatback angle.
2. Release the seatback adjustment lever once the
seat is in a comfortable riding position.

SEAT HEIGHT ADJUSTMENT

You can change the seat height to one of three posi-
tions. See figure 13
Changing the seat height:
1. Turn the scooter off and place the manual freewheel
lever in drive mode.
2. Remove the seat and rear shroud. See VIII. “Dis-
assembly and Assembly.”
3. Loosen and remove the seat height adjustment bolt,
nut, and washers.
4. Slide the upper seat post up or down in the lower
seat post and align the adjustment holes on both posts.
5. With one washer on the seat height adjustment bolt
insert it through the adjustment holes of both the
upper and lower seat posts. Reinstall the other
washer and nut and tighten.
6. Reinstall the shroud.
7. Reinstall and lock the seat into place.
Legend XL
C O M F O R T
Do not operate your
www.pridemobility.com
A D J U S T M E N T S
Figure 12B. Seatback Angle Adjustment
WASHER
NUT
Figure 13. Seat Height Adjustment
SEATBACK
ADJUSTMENT
LEVER
UPPER SEAT POST
WASHER
SEAT HEIGHT
ADJUSTMENT BOLT
LOWER SEAT POST
29