Screen Menu; Wide Mode; Auto Wide; 4:3 Default - Sony KF-E42A10 Service Manual

Screen menu

Screen

Wide Mode

Wide Zoom

Auto Wide

On

4:3 Default

Wide Zoom

Display Area

Noamal

Screen Shift

S e l e c t : Ent e r :
Wide Mode
TV Video
Selects the wide mode manually. For details about the wide mode, see page 20.
Press M/m to select "Wide Zoom", "Normal", "Full" or "Zoom" (see page 20
for details), then press
Note
You cannot select "Normal" when input signals are 720p/1080i.
Tip
You can also select the wide mode manually by pressing
Auto Wide
TV Video
Automatically changes the screen format according to the broadcast signal.
Press M/m to select "On", then press
To keep your setting, select "Off".
Note
You cannot select "Normal" when input signals are 720p/1080i.
Tip
Even if you have selected "On" or "Off" in "Auto Wide", you can always modify the format of the
screen by pressing
4:3 Default
TV Video
Sets the way to enlarge the 4:3 picture to fill the 16:9 screen.
Press M/m to select one of the following, then press
Wide Zoom: Enlarges the 4:3 picture to fill the 16:9 screen, keeping the original image as
much as possible.
Normal: Returns the 4:3 picture to its original size.
Full: Enlarges the 4:3 picture horizontally only.
Zoom: Displays cinemascopic (letter box format) broadcasts in the correct proportions.
Off: Continues using the current Wide Mode setting when the channel or input is changed.
Note
You cannot select "Normal" when input signals are 720p/1080i.
You can select the options listed below on the Screen menu.
To select options
1
2
3
4
End: WEGA GATE
TV
Video
PC
Note
You cannot operate the Screen menu in Twin Picture or Picture Freeze
mode.
PC
.
repeatedly.
Press .
Press M/m to select
Press M/m to select
Press M/m to highlight the option, then press
indicates the available options for TV.
indicates the available options for video input.
indicates the available options for PC input.
repeatedly.
.
, then press .
, then press .
.
33
.
GB