Sony WEGA KF-50SX200U Quick Start Manual

KF-50SX200U
S
®
KF-42SX200U
Thank you for purchasing this Sony product.
After following this step by step guide you
will be able to:
Insert Batteries into the Remote Control.
Connect the Aerial and VCR to your TV.
Select the language of the menu screens.
Select the country in which you wish to
operate the set.
Tune your TV.
Change the broadcast channels into a
different order.
View TV Programmes.
©2003 by Sony Corporation
Ecological Paper - Totally Chlorine Free
Checking the
Accessories Supplied
One Remote
Control (RM-905)
Inserting Batteries into
the Remote Control
Always remember to dispose of used batteries in an
environmental friendly way
Make sure you insert the
batteries using the correct
4-087-359-02 (1)
polarities.
Printed in Spain
1
2 Brackets 1 Hexagon key
1 Cleaning cloth
2 Screws
Two batteries
(AAA size)
2

Connecting the Aerial

and VCR
Connecting cables are not supplied.
The Scart lead is optional, however if you use a Scart lead to connect your
VCR it can improve picture and sound quality when using it.
If you do not use a Scart lead, after automatically tuning the TV set, refer
to the "Manually Tuning the TV" section of the instruction manual, to
tune in the set to the output of your VCR. Also, refer to your VCR
instruction manual to find the output channel of your VCR.
Stabilizing the TV set
After setting up, secure the TV set to a wall, etc., using
the supplied brackets and screws, for safety purposes.
1
Mount the two supplied brackets with the screws provived to the
upper rear side of the TV set.
Do not block or cover this ventilation opening.
For ventilation, leave a space of at least 10 cm from the wall.
2
Pass a strong cord or a chain through each bracket, and then
secure to a wall or a pillar, etc.
3
or
VCR
OUT IN
4