Download Print this page

Full Specifications - DPA 4003 User Manual

Omnidirectional microphones
Hide thumbs Also See for 4003:

Advertisement

FULL SPECIFICATIONS:

Cartridge type:
Pre-polarized condenser
Principle of operation:
Pressure
Power supply:
4003: HMA5000 for 130 V or PCC4000 for P48
4006 and 4006-TL: Phantom P48
Frequency range:
4006-TL: On-axis: 15 Hz - 20 kHz ±2 dB
4003: On-axis: 10 Hz - 20 kHz ±2 dB
4006: On-axis: 20 Hz - 20 kHz ±2 dB
Phase compatibility:
Max. deviation between any two 4003 and 4006 microphones
±10° (See Fig. 10 and 11)
Directional characteristics:
Omnidirectional
Sensitivity:
4006-TL: Nominally 35 mV/Pa; -27 dB re. 1 V/Pa
4003: Nominally 40 mV/Pa; -27 dB re. 1 V/Pa
4006: Nominally 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level A-weighted:
Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level ITU-R BS.468-4:
Typ. 27 dB (max. 29 dB)
Max SPL:
4003: 154 dB SPL peak before clipping
4006 and 4006-TL: 143 dB SPL peak before clipping
Total Harmonic Distortion:
<0.5% THD up to 129 dB SPL peak
<1% THD up to 135 dB SPL peak
PREAMPLIFIER:
Frequency range:
4003: 20 Hz to 50 kHz ±0.2 dB, 5 Hz to 150 kHz -3 dB
4006 and 4006-TL: 20 Hz to 40 kHz ±1dB
14
Output impedance:
4003 and 4006: <75 Ohm
4006-TL: <220 Ohm
Cable drive capability:
4003: From microphone to HMA5000: Up to 20 m (66 ft)
From HMA5000: Up to 300 m (984 ft)
4006: Up to 300 m (984 ft)
4006-TL: Up to 100 m (328 ft)
Polarity:
4003: Positively increasing sound pressure produces positive-
going voltage at pin 4. Pin 1: Ground, Pin 2: Not used, Pin 3: 130 V
DC preamplifier supply, Pin 4: Signal. (See Fig. 1)
4006 and 4006-TL: Positively increasing sound pressure produces
positive-going voltage at pin 2. Pin 1: Ground, Pin 2: Signal +,
Pin 3: Signal return. (See Fig. 2 and 3)
Difference frequency distortion:
(DF2, DF3, Df = 80 Hz) <1% at 135 dB SPL peak
Temperature coefficient:
-0.025 dB/° C at 25° C, 1013 hPa, 250 Hz
Static pressure coefficient:
-0.002 dB/hPa at 25° C, 1013 hPa, 250 Hz
Influence of vibration:
64 dB equivalent SPL for 1 m/s
sensitivity
Influence of magnetic field:
45 dB equivalent SPL for 80 A/m, 50 Hz in direction of
greatest sensitivity
Operating temperature range:
-10 to +70° C (+14 to 158° F)
DIMENSIONS:
Microphone length:
165 mm (6.5 in)
Microphone diameter:
19 mm (0.75 in)
Capsule diameter:
16 mm (0.63 in)
Weight:
150 g (5.29 oz)
2
in direction of greatest
15

Hide quick links:

Advertisement

loading

This manual is also suitable for:

4006-tl40063529-a3530-a