Full Specifications - DPA 4003 User Manual

Cartridge type: Pre-polarized condenser B&K Type MM0042
Principle of operation: Pressure
Power Supply: 4003: HMA4000 Two-channel High-Voltage Microphone
Frequency range: 4003: On-axis: 10Hz - 20kHz ±2dB
Phase response: See Fig. 8 and 9. Phase matching between any two
Directional characteristics: Omnidirectional
Sensitivity: 4003: Nominally 40mV/Pa; -27dB re. 1V/Pa unloaded (at 250Hz)
4006: Nominally 10mV/Pa; -40dB re. 1V/Pa unloaded (at 250Hz)
Equivalent noise level A-weighted: Typ. 15dB(A) re. 20µPa (max. 17dB(A))
Equivalent noise level CCIR 468-1: Typ. 27dB (max. 29dB)
Max SPL: 4003: 154dB SPL peak (f< 4kHz)
4003: 151dB SPL peak (f< 14kHz)
4006: 143dB SPL peak (f > 200Hz)
Total Harmonic Distortion: 129 dB SPL peak (<0.5% THD)
Preamplifier:
Frequency range: 4003: 20Hz to 50kHz ±0,2dB, 5Hz to 150kHz -3dB
Output impedance: <75 Ohm
Cable drive capability: 4003: With HMA4000: Up to 300m
6
Amplifier - 130V or PCC4000 Passive Connection
Converter for P48
4006: Phantom P48
4006: On-axis: 20Hz - 20kHz ±2dB up to 124dB peak
microphones: ±10°
135 dB SPL peak (<1% THD)
4006: 20Hz to 40kHz ±1dB
4003: With PCC4000: <100m
4006: Up to 300m
User's Manual
Full Specification