Sending Documents (Send) - Kyocera TASKalfa 2551ci Operation Manual

Operation on the Machine > Using a Custom Box

Sending Documents (Send)

The procedure for sending documents in a custom box is explained below.
1
2
3
Set the paper selection, duplex printing, etc., as desired.
For the features that can be selected, refer to
If a document stored from a computer is selected, the print settings selection screen appears.
• To use the settings used at the time of printing (when the document was saved), press
[Print As Is]. Press [Start Print] to start printing.
• To change the print settings, press [Print after Change Settings] and change the print
settings.
After a document saved in the machine is selected, the [Use File Settings] key may
appear in the setting screen for the feature to be used.
• To use the settings saved with the document, press [Use File Settings].
• If you need to change the print settings, press [Print after Change Settings].
4
Press the [Start] key. Printing of the selected document begins.
Display the screen.
1
Press [Custom Box] on the Home screen.
2
Select the box containing the document you want to send.
3
Press [Open].
NOTE
If a custom box is protected by a password, enter the correct password.
Send the document.
1
Select the document you wish to send by checking the checkbox.
Box:
File Name
1
0001 2008101010574501
0002 2008101010574511
0003 2008101010574521
2
Print Send Join
The document is marked with a checkmark.
NOTE
You cannot select and send multiple documents.
To deselect, press the checkbox again and remove the checkmark.
Custom Box (Store File, Printing, Send) (page
Custom Box
Date and Time Size
02/02/2013 09:40 21 MB Search(Name)
02/02/2013 09:50 21 MB
02/02/2013 10:00 21 MB
Page Selection
1/1
Detail
Preview
Move/Copy Delete Store File
Close
5-58
6-6).