Reviewing Past Results - OneTouch UltraEasy User Manual



Reviewing past results

Reviewing past results
The meter stores a maximum of 500 blood glucose test results. When the meter memory is full, the oldest result is dropped as the
newest is added. Results are stored automatically when you test, along with the time, date and unit of measurement. You can
review the results stored in the meter memory, starting with the most recent.
If your meter is off, press and release ▼ to turn it on. After the start-up test
screen, your most recent test result will appear on the display. "M" also appears
to indicate memory mode.
If you have just completed a test, leave the test strip in the meter and press ▼
to enter the memory mode. Your most recent blood glucose test result appears
along with "M".
Press ▼ to move to the previous result stored in the meter. Then, press ▲ or ▼
to move forward or backward through all of your results. When you're finished
reviewing past results, press and hold ▼ for two seconds until the meter
turns off.
NOTE: If no results are currently stored in the meter, "–––" will appear on the display.
REVIEWING PAST RESULTS
16