Forearm Sampling; Palm Sampling - OneTouch UltraEasy User Manual

Forearm sampling

Choose a fleshy area of the forearm away from bone, visible veins and hair.
Sometimes there is less blood flow to the forearm than to the fingertips. To help you
get a large enough drop of blood, you may gently massage or apply warmth to the
site to increase blood flow.

Palm sampling

Choose a fleshy area on the palm below your thumb or little finger. Select a spot
with no visible veins and away from deep lines, which may cause your blood
sample to smear.
The clear cap is used for forearm and palm sampling only. Replace the blue (or black) cap with the clear cap.
 Insert a sterile lancet and snap on the clear cap
 Adjust the depth setting
You may have to adjust the lancing device to a deeper setting to get a large enough
drop of blood from your forearm or palm. Twist the clear cap toward the larger
numbers to increase the depth.
Be sure to cock the lancing device.
 Puncture your forearm or palm
Firmly press and hold the lancing device against your forearm or palm for a few
seconds. Wait until the skin surface under the clear cap changes colour
(as blood collects beneath the skin). This tells you there is enough blood
flow for a good sample. Then press the release button while continuing to apply
pressure. Keep holding the lancing device against your skin until a round drop of
blood forms under the cap.
TESTING YOUR BLOOD GLUCOSE
11
Palm
Forearm
Forearm Palm