Download Print this page

Husqvarna CR 125 2008 Workshop Manual page 373

Hide thumbs Also See for CR 125 2008:

Advertisement

9- TRP 2 / CLOCK / RPM (figura 9)
- TRIP 2: distanza- Indicazione max: 999, 9 km / miles (il dato verrà
perso al distacco della batteria).
Per azzerare il TRIP 2, premere il pulsante SCROLL (A) per più di 3
secondi;
- CLOCK: orologio- Indicazione da 0:00 a 23:59:59 ( il dato verrà perso
al distacco della batteria).
Per regolare l'orologio, premere il pulsante SCROLL (A) per più di 3
secondi per incrementare le ore; rilasciato il pulsante, dopo 3 secondi
è possibile incrementare i minuti;
- RPM: regime motore visualizzato sull'indicatore LED verticale.
10- SPEED /RPM (Indicazione numerica regime motore) (figura
10)
- SPEED: velocità- Indicazione max: 299 kmh o 299 mph
- RPM: regime motore visualizzato sull'indicatore LED verticale e
dall'indicazione numerica.
9- TRP 2 / CLOCK / RPM (figure 9)
- TRIP 2: distance- Max value: 999.9 km / miles (the data will be lost
after battery detachment).
To set to zero TRIP 2, push the knob SCROLL (A) for more than 3
seconds;
- CLOCK: clock- Reading from 0:00 to 23:59:59 (the data will be lost
after battery detachment).
To reset the clock, push the knob SCROLL (A) for more than 3
seconds in order to increase the hours; release the knob then, after 3
seconds, it is possible to increase the minutes;
- RPM: engine r.p.m. shown on the vertical LED indicator.
10- SPEED /RPM (engine r.p.m. numerical value) (figure 10)
- SPEED: motorcycle speed- maximum value: 299 kmh or 299 mph;
- RPM: engine r.p.m.; both vertical LED indicator and numerical value
are on.
9- TRP 2 / CLOCK / RPM (figure 9)
- TRIP 2: distance- Indication max: 999, 9 km / miles (la donnée viendra
perdue au détachement de la batterie).
Pour mettre à zéro TRIP 2, presser le bouton SCROLL (A) pour plus de
3 secondes;
- CLOCK: montre- Indication da 0:00 a 23:59:59 ( la donnée viendra
perdue au détachement de la batterie).
Pour régler la montre, presser le bouton SCROLL (A) pour plus de 3
secondes pour développer les heures; relâché le bouton, après 3
secondes il est possible de développer les minutes;
- RPM: régime moteur visualisé sur l'indicateur LED vertical.
10- SPEED /RPM (Indication numérique régime moteur) (figure
10)
- SPEED: vitesse du véhicule - Indication max: 299 kmh ou 299 mph;
- RPM: régime moteur visualisé sur l'indicateur LED vertical
et de l'indication numérique.
N° 8000 B0503 (06-07)
IMPIANTO ELETTRICO
ELECTRIC SYSTEM
INSTALLATION ELECTRIQUE
ELEKTRISCHE ANLAGE
INSTALACION ELECTRICA
9- TRP 2 / CLOCK / RPM (Bild 9)
- TRIP 2: Entfernung- maximaler Wert: 999.9 km / miles (die Daten
werden nach Batterieabtrennung verloren werden).
TRIP 2 umzustellen, drängen Sie der Knauf SCROLL (A) auf mehr als
3 Sekunden;
- CLOCK: Uhr- Die Uhrlektüre ist von 0:00 bis 23:59:59
(die Daten werden nach Batterieabtrennung verloren werden).
Um die Uhr umzustellen, schieben Sie der Knauf" A" denn mehr als 3
Sekunden, um die Stunden zuzunehmen; Freilassung der Knauf und
dann ist es nach 3 Sekunden möglich, die Minuten zuzunehmen;
- RPM: Motor r.p.m. gezeigt auf den senkrechten LED-Anzeiger.
10- SPEED /RPM (Motor r.p.m. numerischer Wert) (Bild 10)
- SPEED: Motorradgeschwindigkeit - maximaler Wert : 299 kmh oder
299 mph;
- RPM: engine r.p.m.; sowohl senkrechter LED-Anzeiger als auch
numerischer Wert sind angeschaltet.
9- TRP 2 / CLOCK / RPM (figura 9)
- TRIP 2: distancia- Indicación max: 999, 9 km / miles ( el dato será
perdido a la separación de la batería).
Para borrar el TRIP 2, comprimir el pulsante SCROLL (A) por más que
3 segundos;
- CLOCK: reloj- Indicación de 0:00 a 23:59:59 ( el dato será perdido a
la separación de la batería).
Para regular el reloj, comprimir el pulsante SCROLL (A) por más que 3
segundos para incrementar las horas; concedido el pulsante, después
de 3 segundos es posible incrementar los minutos;
- RPM: régimen motor visualizado sobre el indicador LED vertical.
10- SPEED /RPM (Indicación numerica) (figura 10)
- SPEED: velocidad del vehículo - Indicación max: 299 kmh o bien 299
mph;
- RPM: régimen motor visualizado sobre el indicador LED vertical y de
la indicación numérica.
+-
M.23

Hide quick links:

Advertisement

Chapters

loading