Download Print this page

Cessna 162 SKYLANE Owner's Manual page 21

Advertisement

concentric rheostat control knobs labeled "LWR PANEL, ENG-RADIO, "
a rheostat control knob labeled "INSTRUMENTS" control the intensity
and
of instrument and control panel lighting.
labeled "POST-FLOOD" is used to
optional post lighting.
control panel.
Switches and controls on the lower part of the instrument panel are
lighted by electrolUminescent panels which do not require light bulbs for
illumination.
To operate this lighting, turn on the "NAV" light switch and
adjust light intensity with the inner control knob labeled "LWR PANEL."
Instrument panel flood lighting consists of four lights located in the
glare shield above the instrument panel and two lights in the overhead
console.
To use flood lighting, place the "POST-FLOOD" selector switch
in the "FLOOD" position and adjust light intensity with the "INSTRU­
MENTS" control knob.
The instrument panel may be equipped with optional post lights which
are mounted at the edge of each instrument or control and provide direct
lighting.
The lights are operated by plaCing the "POST-FLOOD" selector
switch in the "POST" poSition and adjusting intensity with the "INSTRU­
MENTS" control knob.
flood lighting.
The magnetic compass, engine instrument cluster, radios and radio
selector switches have integral lighting and operate independently of post
or flood lighting.
MENTS" control knob.
and radios is controlled by the "ENG-RADIO" control knob.
tion concerning radio selector SWitch lighting, refer to Section Vil.
The control pedestal has two integral lights and the optional overhead
oxygen console is equipped with post lights.
the "ENG""RADIO" control knob.
Map lighting may be provided by three different sources: standard
overhead console map lights, a standard glare shield mounted map light,
and an optional control wheel map light.
conjunction with
in
additional openings just aft of the overhead flood light openings.
openings have sliding COVers controlled by small round knobs.
the map lights, slide the covers open by moving the two knobs toward
each other .
Close the covers When the map lights are no longer required.
These controls are located on the left switch and
SWitching to post lights will automatically turn off
Compass light intensity is controlled by the "IN STRU­
Integral lighting in the engine instrument cluster
panel
instrument
A rocker-type selector switch
lect either standard flood lighting or
This lighting is controlled by
The console ma p lights operate
flood lighting and consiat of two
For informa­
These
To use
2-7

Advertisement

loading