Service Manual Supplement
Maintenance Inspection Report
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
• Make copies of this report to use for
each inspection. Maintain completed
forms for a minimum of 4 years or in
compliance with employer, jobsite
and governmental regulations and
requirements.
• If any inspection receives an "N", tag
and remove the machine from
service, repair and reinspect it. After
repair, place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Comments
10
Refer to the Genie Z-45/25 Bi-Energy & Z-45/25J Bi-Energy Service
Manual for scheduled machine maintenance procedures.
The following scheduled maintenance procedure will need to be
performed every 1000 hours or annually in addition to regularly
scheduled machine maintenance inspections as outlined in the
Service Manual.
Checklist D
D-6.1 Temperature sensor
Self-Propelled Servicing Platform
Y N R
November 2011
Part No. 107713