Yamaha FZS6W Service Manual page 79

1. Fuel pump assembly
2. Fuel tank breather hose
3. Fuel tank drain hose
4. Fuel hose
5. Clip
6. Clamp
7. Fuel tank protector
8. Charge hose (FZS6WC)
9. Roll over valve (FZS6WC)
A. Air opening.
B. Install the O-ring with its lip pointed
upward.
C. Fuel tank breather hose has a white point
mark. (fuel tank breather hose side)
D. Point the knob of clip front side
a. Fuel piping connector attachment direc-
tions. (fuel pump side) Don't use tool.
1. It is inserted until it makes a click sound the
connector, and it checks that a connector
does not fall out. It takes care that a foreign
substance does not enter into a seal por-
tion. (Working groves should not be used
at the time of work.)
E. It prevents that this portion falls out.
2. The clamp is attached from the bottom
after the work of "1". It checks being com-
pletely equipped with, "A", "B" and "C" sec-
tion.
2-56
CABLE ROUTING