Yamaha FZS6W Service Manual page 15

NOTE:
• Even if the air intake temperature is set to be
displayed, the coolant temperature warning
light comes on when the engine overheats.
• When the key is turned to "ON", the coolant
temperature is automatically displayed, even
if the air intake temperature was displayed
prior to turning the key to "OFF".
• When the air intake temperature display is
selected, "A" is displayed for one second,
and then the air intake temperature is dis-
played.
Self-diagnosis device
1. Error code display
This model is equipped with a self-diagnosis
device for various electrical circuits.
If any of those circuits are defective, the engine
trouble warning light will come on, and then the
display will indicate a two-digit error code (e.g.,
11, 12, 13).
LCD and tachometer brightness control mode
1. Tachometer panel
2. Tachometer needle
3. LCD
4. Brightness level
This function allows you to adjust the bright-
ness of the LCD and the tachometer panel and
needle to suit the outside lighting conditions.
To set the brightness
1. Turn the key to "OFF".
2. Push and hold the "SELECT" button.
3. Turn the key to "ON", and then release the
"SELECT" button after five seconds.
4. Push the "RESET" button to select the
desired brightness level.
5. Push the "SELECT" button to confirm the
selected brightness level. The display will
return to the odometer or tripmeter mode.
1-6
FEATURES