Yamaha FZS6W Service Manual page 324

3. Check the hazard switch.
Refer to "CHECKING THE
SWITCHES" on page 8-63.
OK↓
4. Check the turn signal/hazard relay.
Refer to "CHECKING THE
RELAYS" on page 8-71.
OK↓
5. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-19.
OK↓
This circuit is OK.
The neutral indicator light fails to come.
1. Check the neutral indicator light
bulb and socket.
Refer to "CHECKING THE LEDS"
on page 8-67.
OK↓
2. Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-63.
OK↓
3. Check the starting circuit cut-off
relay.
Refer to "CHECKING THE
RELAYS" on page 8-71.
OK↓
SIGNALING SYSTEM
NG→
Replace the left handlebar switch.
NG→
The turn signal relay is faulty and must
be replaced.
NG→
Properly connect or repair the signal-
ing system's wiring.
NG→
Replace the neutral indicator light
bulb, socket or both.
NG→
Replace the neutral switch.
NG→
Replace the starting circuit cut-off
relay.
8-23