Yamaha FZS6W Service Manual page 105

ECA13480
CAUTION:
• Adding water instead of coolant lowers
the antifreeze content of the coolant. If
water is used instead of coolant check,
and if necessary, correct the antifreeze
concentration of the coolant.
• Use only distilled water. However, if dis-
tilled water is not available, soft water
may be used.
• If coolant comes into contact with painted
surfaces, immediately wash them with
water.
• Do not mix different types of antifreeze.
10. Install:
• Radiator cap
11. Fill:
• Coolant reservoir
(with the recommended coolant to the max-
imum level mark "a")
12. Install:
• Coolant reservoir cap
13. Start the engine, warm it up for several
minutes, and then stop it.
14. Check:
• Coolant level
Refer to "CHECKING THE COOLANT
LEVEL" on page 3-17.
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
3-20
ENGINE